0.05 Class Three Phase Electric Meter Test Bench
Major Application and Functions:
1) Touch screen operation for control source panel
2) With standard meter together show all necessary parameters in one screen
3) Majorly used in automatic meter calibration setup (connect and disconnect of meter)
4) Calibration setup include two types: fixed load point and load point changing
5) Calibrate the meter through Genus software by applying control protocol offered. 6) With good power stability and high accuracy output
7) Can switch power factor between 1.0 and 0.5L, also phase angle can set & edit by end user. 8) Can switch four different balance & unbalance conditions 9) Independent output for each phase including voltage & current
10) Can ensure constant power output between connect and disconnect of meter. 11) Protection: current open circuit and voltage short circuit, etc 12) With PC communication port RS232
Output & Build time
Power build time for fixed load point setup: within 5 seconds Power build time for load change setup: within 10 seconds Power stability: 0.02% (value in the range) after power build
Set value to output value: Range ±0.05%, for P, Q, S, V, A, PF
Technical Details
1) Accuracy class of in-built standard meter: 0.05
2) Voltage Range: 3*(0-380V); Adjustable Range: 0-120%; Resolution: 0.01%
Output power: more than 200VA per phase; Distortion: ≤0.5%
3) Current Range: 1mA-120A; Adjustable range: 0-120% ; Resolution: 0.01%
Output power: 1000VA/phase; Distortion: ≤0.5%
4) Phase Angle: 0.00
o ~359.99
o
; Resolution: 0.01° 5) Frequency Range: 45-65HZ; Resolution: 0.01HZ
6) Indication display accuracy: 0.1% (voltage & current); 0.1°(phase); 0.01Hz (Frequency)
0.05 Class Three Phase Electric Meter Test Bench
Technical Parameters
| Accuracy class |
0.05, 0.1 (optional) |
| Output Volts |
| Adjustment Range |
3*(1-480V) (P-N) |
| Resolution |
0.01% |
| Output Distortion |
<0.5% |
| Output Stability |
0.05% or better |
| Output Power |
≥ 30VA/position (total power depends on meter positions) |
| Current output |
| Adjusting Range |
3* (1mA~ 120A), can be up to 200A (optional) |
| Adjustment Resolution |
0.01% |
| Output distortion |
<0.5% |
| Output Stability |
0.05% or better |
| Output power |
≥ 100VA/ positions |
| Phase Measurement |
| Adjust range |
0° ~ 360° |
| Resolution |
0.01° |
| Frequency |
| Output Range |
45-65HZ |
| Resolution |
0.01HZ |
| Other parameters |
| Power supply |
220V or 3×240V/415V±10%, 50/60Hz±10% |
| Ambient conditions |
50C ~ 400C / up to 90% RH |
0.05 Class Three Phase Electric Meter Test Bench
Configurations
1) Three Phases PS(Power source)
2) Three phase Standard meter, class 0.05 or 0.02 or 0.01
3)Meter Rack
Number of positions: 6, 10, 12, 20, 40, 48....optional
Each rack with one emergency STOP switch
Each positions consist of 1 QCD 6 pins + 1 scanning head + 1 meter clamping + 1 RS/232/485
communication port + 1 error display + 1 RESET button + 1 Set of voltage cable
+1 ICT (need ICT or not depends on customer)
4) PC software
5) User Manuals
6) Optional
0.05 Class Three Phase Electric Meter Test Bench
- Isolated Current Transformer (ICT)
Accuracy class: 0.01% (0.5C-1-0.5L)
Current Ratio: 1:1 (1mA-120A)
Current output: 3*(0.001-120)A (both primary and secondary)
Secondary Output load: Maximum 0.5V (output current1mA-120A)
- MSVT
- Personnel Computer
- Printer
Product Tags:
|
|
Adjusting Range 480V Three Phase Meter Test Bench Class 0.02 Images
|
